Machinery International Corporation Machinery International Corporation
Used Metalworking Machinery

COPPER TUBE MACHINERY FOR SALE

NEW OFFERING

All Machines to be sold individually
(Machines Run on 380/415 Volt, 50 Hz or DC SCR)

1600 Ton Schloemann Oil Hydraulic Extrusion Press with Piercer, Gas-Fired Billet Furnace (New 1995), 3 x 240 kW Rexroth Hydraulic Pumps, Press Rebuilt in 2008, Air/Water Cooling Tables (12577)

http://inv.machyintl.com/q/webinv/005249=x,12577


DRAWBENCHES

100,000 Lb. (50 Ton) Aetna Standard 3 Die Drawbench, 100 Ft. (30 m) Draw, 3” (76 mm) O.D. Maximum Tube, 1” (24 mm) Minimum Finish Draw, 280 kW, SCR Thyristor Controls,
Variable Speed, Barrel Rollover Feed, Single Chain (12584)

http://inv.machyintl.com/q/webinv/005249=x,12584

65,000 Lb. (30 Ton) Montbard 3 Die Drawbench, 118 Ft. (36 m) Draw, 1 5/8” (42 mm) Maximum Incoming O.D., 1” (24 mm) Minimum O.D., 450 kW D.C. Variable Speed
with SCR Thyristor Drive, Single Chain (12585)

http://inv.machyintl.com/q/webinv/005249=x,12585


DRAWBLOCKS

84" (2134 mm) Marshall Richards Model VNCB 84 Spinner Block, 300 HP D.C. Drive, 0-938 m/Min. (3077 FPM) Draw Speed, 44 mm - 6 mm (1.75"- 0.236") Tube Draw, 8 Basket Carrousel, 7.2 Ton Draw Pull (12586)

http://inv.machyintl.com/q/webinv/005249=x,12586

84" (2134 mm) Marshall Richards Model VNCB 84 Spinner Block, 350 kW D.C., 0-1100 m/Min. (0-3600 FPM), 48 mm - 6 mm (1.9"- 0.236") Tube Draw, Basket Conveyor, 8 Ton Draw Pull (12587)

http://inv.machyintl.com/q/webinv/005249=x,12587

54" (1370 mm) Marshall Richards Model H4T Horizontal Tube Drawing Blocks, 48mm (1.875") Maximum Entry O.D., 6 mm (0.236") Minimum Finish O.D., 0-405 m/Min. (0-1330 FPM), 10 Ton Pull, 113 kW D.C. Drive w/Telemecanique SCR Thyristor Drive THREE AVAILABLE (12588/12589/12590)

http://inv.machyintl.com/q/webinv/005249=x,12588

http://inv.machyintl.com/q/webinv/005249=x,12589

http://inv.machyintl.com/q/webinv/005249=x,12590


SCHUMAG COMBINED DRAWING MACHINES
(6 AVAILABLE)

Schumag KZ-P-1B, 4 mm - 25 mm (0.157"- 1"), 0-60 m/Min. (0-200 FPM), 75 HP, 3 Ton Pull, 6 m (20 Ft.) Maximum Cut Length, w/Coiler (12591)

http://inv.machyintl.com/q/webinv/005249=x,12591

Schumag KZ-R-1S, 4 mm - 25 mm (0.157"- 1"), 15-50 m/Min. (0-200 FPM), 50 HP (37 kW), 4 Ton Pull, 3 - 6 m (10 - 20 Ft.) Cut Lengths, w/Coiler (12592)

http://inv.machyintl.com/q/webinv/005249=x,12592

Schumag KZ-P-1S, 4 mm - 25 mm (0.157"- 1"), 0-60 m/Min. (0-200 FPM), 75 HP (55 kW), 3 Ton Pull, No Coiler (12593)

http://inv.machyintl.com/q/webinv/005249=x,12593

Schumag KZ-P-1S, 6 mm - 28 mm (0.236"- 1.1"), 15-60 m/Min. (50-200 FPM), 75 HP (55 kW), 3 m - 6 m (10-20 Ft.) Length, 3 Ton Pull, No Coiler TWO AVAILABLE (12594/12595)

http://inv.machyintl.com/q/webinv/005249=x,12594

http://inv.machyintl.com/q/webinv/005249=x,12595

Schumag KZP-1B/5, 6 mm - 28mm (0.236"- 1.1"), 0-60 m/Min. (0-200 FPM), 75 HP (55 kW), 3 Ton Pull w/Coiler (12596)

http://inv.machyintl.com/q/webinv/005249=x,12596


OTHER MACHINES AT THIS PLANT

Ripoche Roller Hearth Annealing Furnace for Copper Coils, 3 Zone, Gas-Fired, New 1995, 1450 mm (57") Hearth Width, Radiant Tube, Maximum Temp. 650 Deg. C (1200 Deg. F), Water Cooling (12597)

http://inv.machyintl.com/q/webinv/005249=x,12597

Automated Solutions Straight Length Tube Bundling Machine, New 2000, Tube Range 9.5 mm - 54 mm (3/8"- 2") O.D., 3 - 6 m (10-20 Ft.) Lengths, Hopper Load 4535 Kg (10,000 Lb.) Max., Descrambler, Vertical Tube Magazine, 5 Taping Heads, 4 Rotating Heads (12603)

http://inv.machyintl.com/q/webinv/005249=x,12603

Matrasur I.D. Shot Blaster Cleaner for 6 mm - 60 mm (¼"- 2 ¼") O.D. Tubes, New 1989 (12601)

http://inv.machyintl.com/q/webinv/005249=x,12601

50 Ton Trayvous Truck Scale, Model TY50, New 2002, Capacity 50 Tons (110,000 Lb.), In-ground (12598)

http://inv.machyintl.com/q/webinv/005249=x,12598

Krollman HRA-4/65 Hydraulic Squeeze Pointers, 55 mm (2.16") Maximum Tube O.D., 4 Die, 11 kW, THREE AVAILABLE (12616/12617/12618)

http://inv.machyintl.com/q/webinv/005249=x,12616

http://inv.machyintl.com/q/webinv/005249=x,12617

http://inv.machyintl.com/q/webinv/005249=x,12618

Stevens & Bullivant Rotary Swager, 65 mm (2 ½") Max. Tube. O.D., Belt Type Rotary Swager, 15 kW (12605)

http://inv.machyintl.com/q/webinv/005249=x,12605

Stevens & Bullivant Rotary Swager, 100 mm (4") Max. Tube O.D., Belt Type Rotary Swager, 15 kW (12606)

http://inv.machyintl.com/q/webinv/005249=x,12606

Carbide Dies and Plugs - Huge Inventory - Over 2500 Carbide Dies from 5mm to 50mm - Over 3800 Carbidge Plugs from 4mm to 44mm (12670)

http://inv.machyintl.com/q/webinv/005249=x,12670


COMPLETE COPPER FITTINGS DEPARTMENT

For Tees and Elbows (12604)(To Be Sold In One Lot) Including:

http://inv.machyintl.com/q/webinv/005249=x,12604

Yorkshire Hydraulic Tee End Forming Line, 10 mm - 60 mm (1/2" - 2 ¼") O.D., New 2000, Suitable for Copper or Stainless Tubes, Mitsubishi Electrics installed New in 2011 (12599)

http://inv.machyintl.com/q/webinv/005249=x,12599

Elbowmatic Copper Tube Elbow Bending Machine, New 1992, Max. O.D. 28 mm (1 Tube) or 18 mm (2 Tubes) for 45/90/180 Degree Elbow Bends, SCR Controls, Automatic Cycle, w/Tooling (12641)

http://inv.machyintl.com/q/webinv/005249=x,12641

Cirrus Tee & Elbow Calibrating Machines, New 2000, for 10 mm - 60 mm (3/8"- 2 ¼") O.D., TWO AVAILABLE - One used for Tees, One used for Elbows (12642)

http://inv.machyintl.com/q/webinv/005249=x,12642

Adiga Sala Automatic Tube Cutting Saws for 10 mm - 32 mm (3/8"- 1 ¼"), New 1995, 380 V., 50 Hz, TWO AVAILABLE (12644/12652)

http://inv.machyintl.com/q/webinv/005249=x,12644

http://inv.machyintl.com/q/webinv/005249=x,12652

Walther Trowal Model CD 400-PN Table Cleaning Machine, New 1997, 420 Litre (110 Gal.) Capacity, 10 mm - 60 mm (0.4"- 2.36") O.D., Copper or Stainless (12646)

http://inv.machyintl.com/q/webinv/005249=x,12646

Comcount Automatic Copper Fittings Line to Weigh, Package, Label and Seal Tees and Elbows into Plastic Bags, New 1999, 380 V., 50 Hz (12647)

http://inv.machyintl.com/q/webinv/005249=x,12647

Cirrus Semi-Automatic Tube End Chamfering Machine for 12 mm - 32 mm (1/2"- 1 ¼"), Siemens SCR Controls, New 1995 (12645)

http://inv.machyintl.com/q/webinv/005249=x,12645

Semi-Automatic Tube End Cutting Machine (12643)

http://inv.machyintl.com/q/webinv/005249=x,12643

Parts/Fittings Drier for Copper or Stainless Tees and Elbows (12648)

http://inv.machyintl.com/q/webinv/005249=x,12648

All Machines are installed. Dismantling and Loading costs available. Plant located in Tunisia. Machines may be sold "as is, where is", or F.O.B. Port.


TUBE MACHINES FOR SALE AT OTHER LOCATIONS

4500 Ton Schloemann Oil Hydraulic Indirect Extrusion Press for Tube or Rod, Straight Lengths or Coils, with Elhaus Gas-Fired Billet Furnace, Dual Ajax Magnathermic 50 m Walking Beam Cooling Table, Dual Rod Coilers (10785)

http://inv.machyintl.com/q/webinv/005249=x,10785

T-Drill Model TCC-50-EF20 Tube End Finishing Machine w/Cutoff and End Forming for Copper or Aluminum Flanges, Collars, Notches, etc. up to 22 mm (7/8") O.D. (10963)

http://inv.machyintl.com/q/webinv/005249=x,10963

2" (50 mm) Mitchell Hydraulic Tube Push Pointer (11228)

http://inv.machyintl.com/q/webinv/005249=x,11228

 

We Have Hundreds of Machines Worldwide Including:

Extrusion Presses *** Billet Casting Lines *** Drawbenches
Drawblocks *** Swagers *** Saws
Cutoffs *** Straighteners *** End Formers

Do you have surplus machines you want to sell? We want to buy them!

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

For Further Information Contact:

John Conroy
Machinery International Corporation - USA
Tel: (+1) 203-484-0400
Fax: (+1) 203-484-4499
E-mail: john@machyintl.com
Web: www.machyintl.com



You are receiving this e-mail because you signed up for our mailing list. If you no longer wish to receive e-mails from us, please reply with "REMOVE" in the subject. Thank you.

Machinery International Corporation considers the privacy of its users to be of utmost importance and works to protect it. Machinery International Corporation uses customer information for internal purposes only. We will not sell or share your information with outside parties.